Barrel and Container Pumps
Application
It used for all neutral, corrosive, flammable, thin or highly viscous, pasty, creamy and aerated liquids. Pump is a light weight, fully portable or stationary barrel and container pump. Stirring and mixing are readily achieved, even in narrow necked vessels, by fitting a mixing tube.
Design
-
Motor heads and pump tube sets are interchangeable according to application. Motor head is surface-cooled, fitted with an insulated handle and a built-in switch and with 5 m cable and plug. Each pump tube has an inner and outer tube, inner tube carefully sealed. Pump tube set is secured to the motor head by a union nut and is easily removed for cleaning. The liquid is pumped upwards between the outer and inner tubes to the outlet. When lifted from the liquid, the pump set drains completely. Pump sets available in lengths of 700, 1000 and 1200 mm.
Connection
-
Discharge socket sidewards below motor head
Temperature
-
Up to max. 120 °C (temporary) depending on material and liquid.
Capacity range
Delivery head
Shaft sealing
-
shaft seal is made of material compatible with the liquids to be pumped i.e., perbunan, viton, ceramics and hard carbon. Special seals available on request. Also available in seal less version.
Materials
-
Pump tube set: aluminum alloy (AlMg 5), stainless steel 1.4571, Hastelloy C, polypropylene, PVDF
-
Impeller and Bearing case: stainless steel, polyamide, polypropylene, PTFE
-
Shaft: stainless steel, Hastelloy
Driver
-
double insulated splash proof commutator motor 240, 230, 110, 42 V AC, 24 V AC/DC, 12 V DC, or gear motors for single or three-phase current, explosion proof (Ex) d3nG5, (Ex) dC3 (T4), dllBT6, class 1 group C and D. With compressed air motor.
Power
-
Transmission: coupling
-
Bearing: sleeve bearings
-
Viscosity: up to 1000° Engler (7580 cp)
-
Tested: to German, Swiss, American and Canadian Standards.