Verticals > Utilities

Deep well centrifugal pumps

Thread version up to 100 m³/h

Deep Water Pump

A - Electrically driven deep well centrifugal pump, consisting of

  • t.e.f.c. electric motor tropical design, power output…kW V1, IP55, n = rpm

  • 1 pump-head with special coupling including filling device

  • column pipes, each 10ft (2 pcss of 5 ft), material steel galvanized, shafts stainless steel

  • 1 pump Q =...m3/h, H=…m, n =…rpm, power needed…kW material cast iron, stainless steel, bronze, plastic

  • 1 suction pipe

  • 1 foot-valve with strainer DN

B - Diesel driven deep well centrifugal pump - separate mounted on two foundation bases (base frames from client), consisting of

  • 1 diesel engine tropical design, power output "A"...kW by...rpm, water - cooled, manual start with crank handle heavy duty filters, flywheel exhaust silencer fuel tank (if diesel engine more than 15 kW additional assembled with electric start, dynamo, battery with case and terminals ready wired, manometer, thermometer, automatic shut-down in case of too low oil-pressure and/or too high water temperature)

  • 1 base frame with spanners and foundation bolts

  • 1 V-belt-drive complete

  • 1 pump-head with special coupling incl. filling device

  • column pipes, each 10ft (2 pcs. of 5 ft), material steel galvanized, shafts stainless steel

  • 1 pump Q = …m3/h, H = …m, n = rpm, power needed, kW material cast iron, stainless steel, bronze, plastic

  • 1 suction pipe

  • 1 foot-valve with strainer DN

Deep Water Pump
Deep Well Pump - compact-unit

C - Diesel driven deep well centrifugal pump "compact-unit" on one foundation base, consisting of

  • diesel engine tropical design, power output “A”…kW by…rpm, water cooled, electric starter with dynamo, heavy duty filters, flywheel and clutch, manometer, thermometer, exhaust silencer with compensator, battery with case and terminals, fuel tank 24 hours in base frame, automatic shut-down in case of too low oil pressure and/or too high water temperature, ready coupled by means of spacer coupling on common base frame with drive and right angle gear - 1:..., unit ready for operation, including filling device.

  • column pipes, each 10 ft (2 pcs. of 5 ft), material steel galvanized, shafts stainless steel.

  • 1 pump Q = m3 / h, H = m, n = rpm, power needed …kW material cast iron, stainless steel, bronze, plastic

  • 1 suction pipe

  • 1 foot - valve with strainer DN

Section drawing of deep well centrifugal pump - flange design

Deep Water Pump
Deep Water Pump